Orthogonal frequency division multiplexing (OFDM) is a critical technology in 3G evolution systems, which can effectively avoid intra-cell interference, but may bring with serious inter-cell interference. Inter-cell interference cancellation is one of effective schemes taken in mitigating inter-cell interference, but for many existing schemes in inter-cell interference cancellation, various generalized spatial diversities are taken, which always bring with extra interference and blind spots, or even need to acquire extra information on source and channel. In this paper, a novel inter-cell interference mitigation method is proposed for 3G evolution systems. This method is based on independent component analysis in blind source separation, and the input signal to interference plus noise ratio (SINR) is set as objective function. By generalized eigenvalue decomposition and algorithm iterations, maximum signal noise ratio (SNR) can be obtained in output. On the other hand, this method can be worked with no precise knowledge of source signal and channel information. Performance evaluation shows that such method can mitigate inter-cell interference in a semi-blind state, and effectively improve output SNR with the condition that lower input SINR, higher input SNR and longer lengths of the processing frame.

Transform each coordinate of the realizations of several random variables (RVs) by the distribution function of the corresponding RV and partition the range space into a uniform grid. The expected number of occupied grid-boxes will be greatest when these RVs are independent. Based on this fact, we propose a novel measure of independence named grid occupancy (GO). We also address the problem of how to make optimum selection of the parameters in GO, i.e., the number of observations and the number of quantization levels. In addition, we apply GO to independent component analysis (ICA). The GO based ICA algorithm can separate signals with arbitrary continuous distributions and favors digital hardware implementation.

A sound field reproduction method is proposed that uses blind source separation and a head-related transfer function. In the proposed system, multichannel acoustic signals captured at distant microphones are decomposed to a set of location/signal pairs of virtual sound sources based on frequency-domain independent component analysis. After estimating the locations and the signals of the virtual sources by convolving the controlled acoustic transfer functions with each signal, the spatial sound is constructed at the selected point. In experiments, a sound field made by six sound sources is captured using 48 distant microphones and decomposed into sets of virtual sound sources. Since subjective evaluation shows no significant difference between natural and reconstructed sound when six virtual sources and are used, the effectiveness of the decomposing algorithm as well as the virtual source representation are confirmed.

An algorithm for blind signal separation (BSS) of convolutive mixtures is presented. In this algorithm, the BSS problem is treated as multidimensional independent component analysis (ICA) by introducing an extended signal vector which is composed of current and previous samples of signals. It is empirically known that a number of conventional ICA algorithms solve the multidimensional ICA problem up to permutation and scaling of signals. In this paper, we give theoretical justification for using any conventional ICA algorithm. Then, we discuss the remaining problems, i.e., permutation and scaling of signals. To solve the permutation problem, we propose a simple algorithm which classifies the signals obtained by a conventional ICA algorithm into mutually independent subsets by utilizing temporal structure of the signals. For the scaling problem, we prove that the method proposed by Koldovský and Tichavský is theoretically proper in respect of estimating filtered versions of source signals which are observed at sensors.

We propose a new algorithm for the blind source separation (BSS) approach in which independent component analysis (ICA) and frequency subband beamforming interpolation are combined. The slow convergence of the optimization of the separation filters is a problem in ICA. Our approach to resolving this problem is based on the relationship between ICA and null beamforming (NBF). The proposed method consists of the following three parts: (I) a frequency subband selector part for learning ICA, (II) a frequency domain ICA part with direction-of-arrivals (DOA) estimation of sound sources, and (III) an interpolation part in which null beamforming constructed with the estimated DOA is used. The results of the signal separation experiments under a reverberant condition reveal that the convergence speed is superior to that of the conventional ICA-based BSS methods.

In this letter we propose a simple adaptive algorithm which solves the unit-norm constrained optimization problem. Instead of conventional parameter norm based normalization, the proposed algorithm incorporates single parameter normalization which is computationally much simpler. The simulation results illustrate that the proposed algorithm performs as good as conventional ones while being computationally simpler.

Fetal electrocardiogram (FECG) extraction is of vital importance in biomedical signal processing. A promising approach is blind source extraction (BSE) emerging from the neural network fields, which is generally implemented in a semi-blind way. In this paper, we propose a robust extraction algorithm that can extract the clear FECG as the first extracted signal. The algorithm exploits the fact that the FECG signal's kurtosis value lies in a specific range, while the kurtosis values of other unwanted signals do not belong to this range. Moreover, the algorithm is very robust to outliers and its robustness is theoretically analyzed and is confirmed by simulation. In addition, the algorithm can work well in some adverse situations when the kurtosis values of some source signals are very close to each other. The above reasons mean that the algorithm is an appealing method which obtains an accurate and reliable FECG.

Permutation ambiguity of the classical Independent Component Analysis (ICA) may cause problems in feature extraction for pattern classification. Especially when only a small subset of components is derived from data, these components may not be most distinctive for classification, because ICA is an unsupervised method. We include a selective prior for de-mixing coefficients into the classical ICA to alleviate the problem. Since the prior is constructed upon the classification information from the training data, we refer to the proposed ICA model with a selective prior as a supervised ICA (sICA). We formulated the learning rule for sICA by taking a Maximum a Posteriori (MAP) scheme and further derived a fixed point algorithm for learning the de-mixing matrix. We investigate the performance of sICA in facial expression recognition from the aspects of both correct rate of recognition and robustness even with few independent components.

In this study, we propose a method of classifying a spontaneous electroencephalogram (EEG) approach to a brain-computer interface. Ten subjects, aged 21-32 years, volunteered to imagine left- and right-hand movements. An independent component analysis based on a fixed-point algorithm is used to eliminate the activities found in the EEG signals. We use a fractal dimension value to reveal the embedded potential responses in the human brain. The different fractal dimension values between the relaxing and imaging periods are computed. Featured data is classified by a three-layer feed-forward neural network based on a simple backpropagation algorithm. Two conventional methods, namely, the use of the autoregressive (AR) model and the band power estimation (BPE) as features, and the linear discriminant analysis (LDA) as a classifier, are selected for comparison in this study. Experimental results show that the proposed method is more effective than the conventional methods.

This paper proposes a new adaptive filter algorithm for system identification by using an independent component analysis (ICA) technique, which separates the signal from noisy observation under the assumption that the signal and noise are independent. We first introduce an augmented state-space expression of the observed signal, representing the problem in terms of ICA. By using a nonparametric Parzen window density estimator and the stochastic information gradient, we derive an adaptive algorithm to separate the noise from the signal. The proposed ICA-based algorithm does not suppress the noise in the least mean square sense but to maximize the independence between the signal part and the noise. The computational complexity of the proposed algorithm is compared with that of the standard NLMS algorithm. The stationary point of the proposed algorithm is analyzed by using an averaging method. We can directly use the new ICA-based algorithm in an acoustic echo canceller without double-talk detector. Some simulation results are carried out to show the superiority of our ICA method to the conventional NLMS algorithm.

This paper deals with adaptive array beamforming based on stochastic gradient descent independent component analysis (ICA) for suppressing interference with robust capabilities. The approach first uses estimates of the interested source directions to construct the multiple regularized constraints, which form an efficient ICA-based beamformer to achieve fast convergence and more robust capabilities than existing MCMV and ESB beamformers. In conjunction with the regularization parameters of the high-order derivative constraints, the width of the main beam for remaining the desired signal and the depth of nulls for suppressing interferers can be adjusted. Several computer simulation examples are provided for illustration and comparison.

In this paper, a novel independent component analysis (ICA) approach is proposed, which is robust against the interference of impulse noise. To implement ICA in a noisy environment is a difficult problem, in which traditional ICA may lead to poor results. We propose a method that consists of noise detection and image signal recovery. The proposed approach includes two procedures. In the first procedure, we introduce a self-organizing map (SOM) network to determine if the observed image pixels are corrupted by noise. We will mark each pixel to distinguish normal and corrupted ones. In the second procedure, we use one of two traditional ICA algorithms (fixed-point algorithm and Gaussian moments-based fixed-point algorithm) to separate the images. The fixed-point algorithm is proposed for general ICA model in which there is no noise interference. The Gaussian moments-based fixed-point algorithm is robust to noise interference. Therefore, according to the mark of image pixel, we choose the fixed-point or the Gaussian moments-based fixed-point algorithm to update the separation matrix. The proposed approach has the capacity not only to recover the mixed images, but also to reduce noise from observed images. The simulation results and analysis show that the proposed approach is suitable for practical unsupervised separation problem.

This paper presents a method for blind identification of a system whose transfer matrix is non-invertible at infinity, based on independent component analysis. In the proposed scheme, the transfer matrix to be identified is pre-multiplied by an appropriate polynomial matrix, named interactor, in order to compensate the row relative degrees and obtain a biproper system. It is then pre-multiplied by a demixing matrix via an existing approximate method. Both of these matrices are estimated blindly, i.e. with the input signals being unknown. The identified system is thus obtained as the inverse of the multiplication of these matrices.

In this paper, we propose to employ an extension to the natural gradient algorithm for robust Independent Component Analysis against outliers. The standard natural gradient algorithm does not exhibit this property since it employs nonrobust sample estimates for computing higher order moments. In order to overcome this drawback, we propose to use robust alternatives to higher order moments, which are comparatively less sensitive to outliers in the observed data. Some computer simulations are presented to show that the proposed method, as compared to the standard natural gradient algorithm, gives better performance in the presence of outlying data.

In this paper, we propose to employ a characteristic function based non-Gaussianity measure as a one-unit contrast function for independent component analysis. This non-Gaussianity measure is a weighted distance between the characteristic function of a random variable and a Gaussian characteristic function at some adequately chosen sample points. Independent component analysis of an observed random vector is performed by optimizing the above mentioned contrast function (for different units) using a fixed-point algorithm. Moreover, in order to obtain a better separation performance, we employ a mechanism to choose appropriate sample points from an initially selected sample vector. Finally, some computer simulations are presented to demonstrate the validity and effectiveness of the proposed method.

In a conventional method based on quadrature 2D Gabor wavelets to extract iris features, the iris recognition is performed by a 256-byte iris code, which is computed by applying the Gabor wavelets to a given area of the iris. However, there is a code redundancy because the iris code is generated by basis functions without considering the characteristics of the iris texture. Therefore, the size of the iris code is increased unnecessarily. In this paper we propose a new feature extraction algorithm based on independent component analysis (ICA) for a compact iris code. We implemented the ICA to generate optimal basis functions which could represent iris signals efficiently. In practice the coefficients of the ICA expansions are used as feature vectors. Then iris feature vectors are encoded into the iris code for storing and comparing individual's iris patterns. Additionally, we introduce a method to refine the ICA basis functions for improving the recognition performance. Experimental results show that our proposed method has a similar equal error rate as a conventional method based on the Gabor wavelets, and the iris code size of our proposed methods is five times smaller than that of the Gabor wavelets.

This paper describes a pattern classifier for detecting frontal-view faces via learning a decision boundary. The proposed classifier consists of two major parts for improving classification accuracy: the implicit modeling of both the face and the near-face classes resulting in an extended discriminative feature set, and the subsequent composite Support Vector Machines (SVMs) for speeding up the classification. For the extended discriminative feature set, Principal Component Analysis (PCA) or Independent Component Analysis (ICA) is performed for the face and near-face classes separately. The projections and distances to the two different subspaces are complementary, which significantly enhances classification accuracy of SVM. Multiple nonlinear SVMs are trained for the local facial feature spaces considering the general multi-modal characteristic of the face space. Each component SVM has a simpler boundary than that of a single SVM for the whole face space. The most appropriate component SVM is selected by a gating mechanism based on clustering. The classification by utilizing one of the multiple SVMs guarantees good generalization performance and speeds up face detection. The proposed classifier is finally implemented to work in real-time by cascading a boosting based face detector.

We propose a new two-stage blind separation and deconvolution strategy for multiple-input multiple-output (MIMO)-FIR systems driven by colored sound sources, in which single-input multiple-output (SIMO)-model-based ICA (SIMO-ICA) and blind multichannel inverse filtering are combined. SIMO-ICA can separate the mixed signals, not into monaural source signals but into SIMO-model-based signals from independent sources as they are at the microphones. After the separation by the SIMO-ICA, a blind deconvolution technique for the SIMO model can be applied even when each source signal is temporally correlated and the mixing system has a nonminimum phase property. The simulation results reveal that the proposed algorithm can successfully achieve separation and deconvolution of a convolutive mixture of speech, and outperforms a number of conventional ICA-based BSD methods.

Recently, DOAS (differential optical absorption spectroscopy) has been used for nondestructive air monitoring, in which the LS (least squares) method is used to calculate trace gas concentrations due to its computational simplicity. This paper applies the ICA (independent component analysis) method to the DOAS system of air monitoring, since the LS method is insufficient to recover the desired spectra perfectly due to sparsity characteristic. If the sparsity of reference spectra in the DOAS system imposes the assumption of independence, the ICA algorithm can be used. The proposed method is used to regress the observed spectrum on the estimates of the reference spectra. The ICA algorithm can be seen as a preprocessing method where the ICs of the references are used as the input in the regression. The performance of the proposed method is evaluated in simulation studies using synthetic data.

In this paper, we address the blind separation problem of binaural mixed signals, and we propose a novel blind separation method, in which a self-generator for initial filters of Single-Input-Multiple-Output-model-based independent component analysis (SIMO-ICA) is implemented. The original SIMO-ICA which has been proposed by the authors can separate mixed signals, not into monaural source signals but into SIMO-model-based signals from independent sources as they are at the microphones. Although this attractive feature of SIMO-ICA is beneficial to the binaural sound separation, the current SIMO-ICA has a serious drawback in its high sensitivity to the initial settings of the separation filter. In the proposed method, the self-generator for the initial filter functions as the preprocessor of SIMO-ICA, and thus it can provide a valid initial filter for SIMO-ICA. The self-generator is still a blind process because it mainly consists of a frequency-domain ICA (FDICA) part and the direction of arrival estimation part which is driven by the separated outputs of the FDICA. To evaluate its effectiveness, binaural sound separation experiments are carried out under a reverberant condition. The experimental results reveal that the separation performance of the proposed method is superior to those of conventional methods.